Heavy Industrial Steel Buildings/Prefabricated Steel Power Plants
Project description:
Heavy Industrial Steel Buildings/Prefabricated Steel Power Plants. We design the 3D model for the steel frame structure of the
building. Then we fabricate the steel components about 600 tons and
install it together with the General contractor.
For such project, we also design the 3D Tekla model for our client.
The paint thickness of such project is also very thick, we have
indoor painting room to solve it.
The main characteristics of the steel structure engineering of the
factory building:
(1) Strong shock resistance. Because the materials used in the
construction of steel structures are mainly metal materials, and
the steel used has great advantages in tensile and compressive
strength. Because steel structure has vibration delay performance,
it has good advantages in seismic performance. The appearance of
steel structure has greatly improved the level of earthquake
resistance in my country.
(2) The construction speed is fast. In the construction of steel
structures, the construction speed is very fast, and the
construction period is relatively short, which is very beneficial
for those processes with tight construction periods. This greatly
increases the speed of construction because the steel structure is
completed in the fabrication plant. The overlap between the
equipment, the roof panel and the lighting panel, strengthen the
overlap between the ventilation equipment.
(3) Save space. In the construction of steel structures, scientific
design can be used to ensure that there are no columns inside the
building, and in this way, a wider space can be provided for the
interior of the construction project, which is more conducive to
the full arrangement of the interior of the building. In the
construction of steel structure, because it has a lot of lines or
pipelines, it can save some space to the maximum extent, and it is
very convenient for the renovation of lines and pipelines.
(4) High heat resistance, poor fire resistance and poor corrosion
resistance. Compared with other buildings, because the steel used
in the construction of steel structures can withstand a high
temperature of 200 degrees Celsius, if the temperature reaches
above 200 degrees Celsius, the performance of the steel will be
lower, which leads to the heat resistance of the steel structure.
Relatively strong, but also relatively poor in fire resistance.
Therefore, it is necessary to take effective measures to prevent
this characteristic of the steel structure, such as using some
refractory materials to make a thermal insulation layer to better
improve the fire resistance of the steel structure. In addition,
because the main material of the steel structure is steel, because
the corrosion resistance of steel is relatively poor, the overall
corrosion resistance of the steel structure is also relatively
poor. In the design process, the use type and geographical location
of the plant should be fully considered. Appropriate anti-corrosion
measures and processes shall be adopted according to the local
weather conditions.
Steel Designing & Detailing:
We have a dedicated steel structure engineering design department
and research and development department, and established an
independent and complete steel structure engineering design,
optimization and deepening design system. Establishing engineering
materials than building materials, we not only control the
reliability and economy of the structure, but also the categories,
performance, selection and combination of traditional enclosing
materials and new maintenance materials. Our design is not only
more applicable, safer, more economical, but also rich in
architectural beauty.
Main parts of the steel structures and technical parameters:
| Main Steel Frame Structure |
| Main structure | H section steel Q345, alkyd painting, two primary painting, two
finish painting. |
| Intensive bolt | Grade 10.9 |
| Turn buckle bolt | M20+2, steel Q235, processing |
| Anchor bolt | M24, steel Q235, processing |
| Ordinary bolt | Galvanized bolt M20 |
| Ordinary bolt | Galvanized bolt M12 |
| Batter brace | Φ32*2.5, Φ12 round steel bar Q235, process and painted (alkyd
painting) |
| Fittings & accessories | Nails, glue etc. |
Packing & Loading:
All the structure components, panels,bolts and sort of accessories
will bewell packed with standard package suitable ocean
transportation and loaded into 40’HQ.
Why us?
| 1 | Professional design team | We could design the drawing as your requirement or calculate the
steel quantity based on your drawing. |
| 2 | Skilled fabrication team and advanced equipment | We make the independent production schedule to each project. Our
engineers will introduce and train workers for each project before
fabrication works start. |
| 3 | One-stop service | Nearly each steel structure project is customized by our clinets’
requirement. We have completed lots such kinds of projects, we
could provide the integrated proposal for your project. |
| 4 | Professional QC team | Professional QC team will guarantee that we will provide the
production and service as your request. |
| 5 | After sales service | If it has any questions that need us to do in your process of
using, such as the maintain of outside insulation and steel
components, just tell us , we will try to provide the service as
well as we can. |
