Industrial Prefabricated Structural Steel Framing Warehouse
Construction
Project information:
Industrial Prefabricated Structural Steel Framing Warehouse
Construction. The overall floorage of this Industrial Prefabricated
Structural Steel Framing Warehouse Construction is 7,200 square
meters. It is a portal frame steel structure building, double span
double ridge. Portal frame steel building could provide large space
and easy to build.
We can design and fabricate customized steel structure components
for light and heavy steel structure buildings in protal frame and
dome frame, such as warehouse, workshop, storage, hangar, chicken
shed, steel shed for market and ground parking, supermarket , high
rise steel office buiding, factory , plant, exhibition hall, gym,
dormitory building, oli&gas, power station, infrastructure
buildings, etc.
Project Content & Scale:
New warehouse with covered area of 7200m².
| Name | Industrial Prefabricated Structural Steel Framing Warehouse
Construction |
| Structure Type | portal frame, two ridges, two spans |
| Length | 120m |
| Width | 60m |
| Eave Height | 9m |
| Roof Slope | 20% |
| Gable Wall Column Spacing | 7.5m |
| Roof | 0.5mm thick steel galvanized board
|
| Wall | 0.5mm thick steel galvanized board+3m block wall |
| Door | Sliding door |
| Window | Ribbon Skylight |
| Height difference between indoor and outdoor | 300mm |
The construction materials List:
| NO. | Item | Specification |
| 1 | Main Pillar & Beams | Q345B |
| 2 | Roof Purlins | C200*70*20*2.5 Galvanize |
| 3 | Tie Bar | Φ114*4 |
| 4 | Pillar Supporters | Φ20 |
| 5 | Tie rod | Φ12,Φ32*2.5 |
| 6 | Kneebracing | L50*4 |
| 7 | Foundation bolt | M24 |
| 8 | General Bolts | C Grade |
| 9 | Bolt screw | Φ19 |
| 10 | High Strengthened Bolts | 10.9 Grade |
| 11 | Roof Panel | 0.5mm Galvanized Steel Plate |
| 12 | Ribbon skylight | 1.2mm FRP |
| 13 | Floor Steel deck | 1.00 mm steel plate |
| 14 | Doors | Sliding door |
| 15 | Windows | Steel windows |
| 16 | Gutters | 3mm thick galvanized steel |
| 17 | Edge and corner wrapping | 0.5mm Galvanized Steel Plate |
| 18 | Fans | |
| 19 | Accessories | |
| 20 | Down pipe | Φ140PVC |
Our steel structure production line:
The floor space of our steel structre fabrication factory is
35,000㎡, and the workshop area is 20000㎡. We own three light/heavy
H steel production lines, BOX production lines, C/Z purlin
production lines and various types of profiling steel sheet
machines with advanced equipment such as plasma cutting machine.
Installation:
1: We provide shop drawing before installation.
2. Then our engineer guide on site for installation
The following question we need to know before making the price if
you need us to design:
Just feel free to fill the form based on what you know.
| 1 | Location (where will be built?) | _____country, area |
| 2 | Size: length*width*height | _____mm*_____mm*_____mm |
| 3 | wind load (max. wind speed) | _____kn/m2, _____km/h, _____m/s |
| 4 | snow load (max. snow height) | _____kn/m2, _____mm |
| 5 | anti-earthquake | _____level |
| 6 | brickwall needed or not | If yes, 1.2m high or 1.5m high |
| 7 | thermal insulation | If yes, EPS, fiberglass wool, rockwool, PU sandwich panels will be
suggested; . if not, the metal steel sheets will be ok. The cost of
the latter will be much
lower than that of the former |
| 8 | door quantity & size | _____units, _____(width)mm*_____(height)mm |
| 9 | window quanity & size | _____units, _____(width)mm*_____(height)mm |
| 10 | crane needed or not | If yes, _____units, max. lifting weight____tons; max. lifting
height _____m |
