Lightweight Prefabricated Steel Warehouse With Overhead Crane
Lightweight Prefabricated Steel Warehouse With Overhead Crane
mainly refers to the steel structure buildings that is consisted of
lightweight steel beams and columns, welded steel structure
components are connected by bolts. Take this project as an example:
this steel structure warehouse is used to store metal raw material.
It will install a 5 Ton electric single girder crane on the crane
beam. To provide more working space in this building, we dont
design the middle steel column in it. Because of the small wind
load and crane load, the steel quantity for this project is only 35
kg per square meter.
Project information of Structural steel frame warehouse buildings:
| Name | Lightweight Prefabricated Steel Warehouse With Overhead Crane |
| Structure Type | Portal frame, single ridge, single span |
| Length | 80m |
| Width | 20m |
| Eave Height | 8m |
| span | single span |
| Steel structure quantity | 60 Ton |
| Column&Beam | H-section steel, latticed column, honeycomb beam, truss beam |
| Roof & Wall sandwich panel | 0.5mm steel cladding sheet |
| Door | Sliding door |
| Window | Ribbon Skylight |
Main parts of the steel structures and technical parameters:
| Steel Frame | H section steel | Q235/Q345 steel 8mm/10mm |
| Welding | Automatic submerged arc welding |
| Rust removal | Sand blasting |
| Surface finish | Alkyd paint or galvanized |
| Intensive bolt | M20,Grade 10.9 |
| Supporting System | Angle brace | L50x4,Steel Q235, processed and painted |
| Horizontal brace | Φ20, Steel Q235, processed and painted |
| Column brance | Φ20, Steel Q235, processed and painted |
| Tie rod | Φ89*3, Steel Q235, processed and painted |
| Ordinary bolt | M12 Galvanized bolt |
| Roof | Purlin | C160*60*2.5,Steel Q235, galvanized and painted |
| Roof panel | 0.5mm steel cladding sheet |
| Sky light | 6mm thick PVC |
| Accessories | Glass cement, self-tapping screws, etc. |
| Edge cover | 0.4mm steel sheet profile trimming |
| Gutter | 0.4mm thick sheet steel profile or galvanized sheet |
| Down pie | Φ110PVC |
| Walls | Purlin | C160*60*2.5,Steel Q235, painted |
| Wall | 0.5mm steel cladding sheet |
| Accessories | Glass cement, self-tapping screws, etc. |
| Edge cover | 0.4mm steel sheet profile trimming |
| Ventilation | Ventilation ball |
| Doors & windows | Rolling door/sliding door PVC/alu/steel/window |
Steel Designing & Detailing:
We could design the drawing as your requirement or calculate the
steel quantity based on your drawing. We have a dedicated steel
structure engineering design department and research and
development department, and established an independent and complete
steel structure engineering design, optimization and deepening
design system. Establishing engineering materials than building
materials, we not only control the reliability and economy of the
structure, but also the categories, performance, selection and
combination of traditional enclosing materials and new maintenance
materials. Our design is not only more applicable, safer, more
economical, but also rich in architectural beauty.
Our steel structure fabrication factory:
We are manufacture factory. Welcomed to visit us at any time. The
quality control flow and sales team will show you our
professionalism. Also you will get best and most competitive price
after visiting us.
Why us?
1. Professional design team, we could design the drawing as your
requirement or calculate the steel quantity based on your drawing.
2. Skilled fabrication team and advanced equipment. We make the
independent production schedule to each project.
3. One-stop service: We have completed lots such kinds of projects,
we could provide the integrated proposal for your project.
4. Professional QC team will guarantee that we will provide the
production and service as your request.
5. After sales service: If it has any questions that need us to do
in your process of using, such as the maintain of outside
insulation and steel components, just tell us , we will try to
provide the service as well as we can.
How to quote:
The following question we need to know before making the price.
Just feel free to fill what you know.
| 1 | Location (where will be built?) | _____country, area |
| 2 | Size: length*width*height | _____mm*_____mm*_____mm |
| 3 | wind load (max. wind speed) | _____kn/m2, _____km/h, _____m/s |
| 4 | snow load (max. snow height) | _____kn/m2, _____mm |
| 5 | anti-earthquake | _____level |
| 6 | brickwall needed or not | If yes, 1.2m high or 1.5m high |
| 7 | thermal insulation | If yes, EPS, fiberglass wool, rockwool, PU sandwich panels will be
suggested; . if not, the metal steel sheets will be ok. The cost of
the latter will be much
lower than that of the former |
| 8 | door quantity & size | _____units, _____(width)mm*_____(height)mm |
| 9 | window quanity & size | _____units, _____(width)mm*_____(height)mm |
| 10 | crane needed or not | If yes, _____units, max. lifting weight____tons; max. lifting
height _____m
|
