Clear Span Pre Engineered Buildings As Prefabricated Steel Frame
Warehouse
Project description:
This is a Clear Span Pre Engineered Buildings As Prefabricated
Steel Frame Warehouse. We design the proposal drawing, fabricate
all the steel structure components & provide all the necessary
accessory such as window, doors, bolts, etc. Then install it on
construction site.
Compared with ordinary reinforced concrete structure, prefabricated
steel structure buildings has the advantages of fast construction,
low construction cost, good earthquake resistance and high recovery
rate. The strength and elastic modulus of steel are many times
higher than that of masonry and concrete. Under the same load
conditions, the quality of steel components is light. The steel
structure is suitable for large-scale production in factories and
has a high degree of industrialization. It can integrate advanced
products such as energy saving, waterproofing, heat insulation,
doors and windows, and complete application. It will integrate
design, production and construction to improve the level of the
construction industry.
Basic information of this project:
| Steel Frame | H section steel | Q235/Q345 steel plate thickness: 8-30mm |
| Welding | Automatic submerged arc welding |
| Rust removal | Sand blasting |
| Surface finish | Alkyd paint or galvanized |
| Intensive bolt | M20,Grade 10.9 |
| Supporting System | Angle brace | L50x4,Steel Q235, processed and painted |
| Horizontal brace | Φ20, Steel Q235, processed and painted |
| Column brance | Φ20, Steel Q235, processed and painted |
| Tie rod | Φ89*3, Steel Q235, processed and painted |
| Ordinary bolt | M12 Galvanized bolt |
| Roof | Purlin | C160*60*2.5,Steel Q235, galvanized and painted |
| Roof panel | Sandwich panel or corrugated steel sheet |
| Sky light | 6mm thick PVC |
| Accessories | Glass cement, self-tapping screws, etc. |
| Edge cover | 0.4mm steel sheet profile trimming |
| Gutter | 0.4mm thick sheet steel profile or galvanized sheet |
| Down pie | Φ110PVC |
| Walls | Purlin | C160*60*2.5,Steel Q235, painted |
| Wall | Sandwich panel or corrugated steel plate |
| Accessories | Glass cement, self-tapping screws, etc. |
| Edge cover | 0.4mm steel sheet profile trimming |
| Ventilation | Ventilation ball |
| Doors & windows | Rolling door/sliding door PVC/alu/steel/window |
Design:
For such project , we will design the preliminary layout drawing,
3D Tekla model and installation drawing to contribute to the
completion of the project.
Steel structure fabrication in our factory:
Packing & Loading:
All the structure components, panels,bolts and sort of accessories
will bewell packed with standard package suitable ocean
transportation and loaded into 40’HQ.
